industrial contractor in Gary, IN

Companies aim for success and growth within their business.  This growth often leads to the idea of expansions. STEVENS Engineers and Constructors understands this, and thus provides the finest and reliable engineering services for industrial companies in Gary, IN.

With all our 75 years of helping the businesses of Gary, you don’t need to hesitate when it comes to a partner that can provide quality service in the field of Industrial Contractors, as we give our best to exceed your expectations.

Here at STEVENS, we know it can be difficult to find an industrial company in Indiana that can provide an on time and good quality service for your project. A partner that has the best knowledge and tools that can solve any kind of complications while the project is ongoing.

You don’t have to worry about this matter with STEVENS, as we can provide you the assurance in satisfaction by working hand in hand for all of your requirements and demands from an Industrial Contractor in Gary, IN.

STEVENS has a wide range of industries including:

1. Metals

2. Oil & Gas

3. Energy & Power

4. Chemical

5. Waste Water

6. Government

7.Food

Our constructors and engineers are equipped to handle projects of any scale, while maintaining tight standards for quality, communication, and safety. 

Specifically, we also have expertise in providing the following: 

 

All our years of achievement is not just because of our reliable service but also because we have Nucor all the way through as our steel manufacturer. Also, with Nucor, we can guarantee a durable and environmentally-friendly product as STEVENS uses 90% recycled steel from them. And, as partners, we ensure you that all we use in erecting our buildings are highly durable American-made steel.

One of our prime services is the Pre-engineered metal building kits, as it is pertinent for any kind of industry. These steel buildings STEVENS on Gary are known for their compliance, unlimited customization options, and aesthetically-pleasing design. 

Pre-engineered buildings are an ideal solution for future expansions for companies in Gary and can be easily customized for energy-efficiency because of its versatility. 

STEVENS also has BIM or Building Information Modeling. This tool helps us in showing the possible outlook of the project even before we start building, which gives us a great benefit as we can show it on our clients and apply all their idea and probable requirements.

STEVENS knows how imperative it is too always look after safety as our profession involves a lot of possible danger. Luckily, with all our cautiousness we survive 50 years in service without any casualties. We will not tarnish the name that we have built in the industry by just violating safety regulations and standards.

STEVENS's aim is to only provide the best steel structures with all our commitment to hard work to service a wide range of industrial purposes. Our metal erection expertise spans from raising gang on buildings to changing crane rails and beyond.

And with STEVENS dedication to meet the industry’s demands for construction, our engineers and constructors never miss out on routine crane inspections, regular equipment checks, safety and quality control, and more.

Moreover, here with us, you can also obtain an advanced design and engineering services for engineered lifts and complete these projects with CDMG, our wholly-owned engineering subsidiary.

Our rigging services include, but are not limited to: 

  1. Verifying weights 
  2. Alignment 
  3. Rigging limitations 
  4. Installations 
  5. Clearance restrictions 

In every comprehensive heavy rigging service that we offer we assure that each is done with complete consideration for security in every project, all with insurance for on-schedule accomplishment according to our client's exact specifications.

Here at STEVENS, we’re very strict with preventing hazards from rigging and heavy living projects affect our workers or our customers, as easing future complications is our engineers and constructor's main focus before an erection project.

When it comes to pipe fabrication, STEVENS also steps up as we also have our own fabricating shop which is capable of producing 10,000 LF of fabricated pipes monthly. Not only that we can supply, but STEVENS also can do specialized pipes for a more specific project with less cost in Gary, IN. 

And having these all provide us the ability to utilize state-of-the-art welding and cutting equipment and a variety of mandrel benders to produce the best of qualities for a pipe on the market with minimal rejected welds at a faster rate. 

This cut back our communication errors, faulty products, and delayed delivery. 

We also offer hydrostatic testing, protective coating solutions, chemical cleaning and flushing, documentation, and other pipe-related services. 

STEVENS maximizes the latest pipe fabrication technology, tooling, cutting, welding, and mandrel benders to provide fabricated pipes that are pinned with the quality control and local and national standards. 


 

With a wide range of civil service and quality works we make sure that each of our clients are always satisfied with their project for expansion or renovation.

So if you ever find yourself looking for the best partner that could assist you with the civil concrete services, STEVENS is always open for these opportunities. One great example of our competence is building PPL Brunner Island which we and Shaw, our subcontractor, managed to complete 36,500 cy of excavation, 10,500 cy of mass pours of foundations and 8,000 LF of H-pile outsourced. 

Our services include: 

  1. Rebar
  2. Curing
  3. Water stops 
  4. Foundations 
  5. Anchor bolts 
  6. Expansion 
  7. Additives 
  8. Construction joints 
  9. Mass pours
  10.  Layout 
  11. Embedded metal 
  12. Quality control 

By simplifying maintenance procedures and reduce energy consumption one machine at a time STEVENS got what it takes to give the best assistance for better productivity.

And because obviously efficiency is our trademark, STEVENS only settle for equipment such as precision laser alignment devices as a part of our arsenal of world-class equipment.

There are other machines our talented field engineers operate such as a robotic total station to have full optimization of a machine’s full potential. Our team works to the one-thousandth of an inch to mitigate damage to bearings and seals.

And, for your plant machines to last for a bigger production, STEVENS professionals ensure a thorough setting and alignment services while working quickly to reduce downtime.

With 50 years in the industry working on large-scale construction projects with various clients from the industry, STEVENS has moved a lot of cubic yards of land for property developments.

De-watering, utility relocation, backfill, and mass excavation are some of the services we offer within the spectrum of comprehensive excavation and site work in Gary, IN.

Moreover, when it comes to scheduling, layout, reporting, safety, national regulations, and permitting we keep our standards and quality lifted and through the process of accomplishment we always ensure that we fill the clients’ exact specifications.

And, with all these capabilities we never hold back in also covering the process of installing them. Whether it is ¾” to 20” of pipes, carbon steel to stainless and in-schedule XXS to standard, our professionals can handle those.

But, before getting into the project, the installation proposal is the very first thing STEVENS do to ensure that nothing will be placed on different positions later on. Furthermore, we comply with our pipe installation services all with sincerity of work, quality, efficiency, safety and of course a budget-friendly cost. 

Heedless if it would be a bridge, highways or any other Sheet and H-pile projects as long as you have STEVENS it is possible to be accomplished. With the best pile driving equipment, we install H-Pile for deep foundation applications where anyone can lay their hands on. And, with our full-service construction and efficiency, most clients would take our excavation services simultaneous with our Sheet and H-pile capabilities. 

STEVENS completes geotechnical testing as-needed for soil stability and other factors to identify the structural requirements for each project. We know the benefit of a durable H-Pile in securing facilities located in challenging soil conditions and active seismic areas.

Our engineers are built and skilled with results-driven planning, thorough scheduling, team collaboration, and detailed regular reporting are some of the characteristics our skilled engineers have. 

Here at STEVENS, we stand with the words that every successful industrial construction project begins with quality design and engineering; this is the reason behind every custom engineering service we offer to guarantee the outcome of every project matches our client's expectations seamlessly.

However, the project without communication is a partnership without understanding, that’s why our engineers are determined to build strong communication with our take holders; we let them collaborate on project decisions to make sure that everything is agreed upon before the construction.

Gary Construction Projects

STEVENS Engineers & Constructors is more than a general contractor.

With our various capabilities obviously, STEVENS is not just a general contractor based in Gary, Indiana. By having all the trending technologies for industrial construction, we can ensure that the work and project will be in sync with all the demands and expectations of our clients. We perform the scheduling, layout, and reporting to ensure your project is completed on time and with the highest efficiency.

We have an extensive portfolio of successful industrial construction projects throughout the Gary area and beyond.

INDIANA PROJECTS

  • ARCELORMITTAL
    ARCELORMITTAL
    Civil Concrete | Heavy Rigging | Pipe Installation | Equipment Setting & Precision Alignment
  • HAMMOND SPORTS COMPLEX
    HAMMOND SPORTS COMPLEX
    Steel Erection
  • GREATER CHICAGO CASTER UPGRADE
    GREATER CHICAGO CASTER UPGRADE
    Pipe Fabrication & Installation
×
ARCELORMITTAL

East Chicago, Indiana

9 miles from Gary, IN

Over the course of five months in 2016, STEVENS completed the #2 Slab Caster Upgrade at ArcelorMittal Indiana Harbor West Facility.

STEVENS scope of work included:

  1. Extensive modifications to existing foundations
  2. Heavy rigging
  3. Precision level and alignment of a new slab caster
  4. Refurbishing equipment from the tundish down to the cut off the machine — all with minimal engineering.
  5. Pipe installation for a new spray chamber, water, grease, air and hydraulic — all field routed and installed “as-built”.

Our work on this project was performed over multiple shifts, logging over 70,000 man hours without a single safety incident.

Categories :
Civil Concrete | Heavy Rigging | Pipe Installation | Equipment Setting & Precision Alignment
×
Gary Steel Erection Services | STEVENS Engineers & Constructors
Gary Steel Erection Services | STEVENS Engineers & Constructors
HAMMOND SPORTS COMPLEX
Hammond, Indiana 

11 miles from Gary

STEVENS erected structural steel, joists, and decking for this 135,000 square-foot state-of-the-art sports complex just outside of Chicago.

This complex features:

  • 6 basketball courts
  • 12 volleyball courts
  • 2 regulation-size indoor soccer fields
  • 6 batting cages

STEVENS also installed an upper-level track used for running and walking that doubles as stadium seating for sporting events in the facility.

Construction started in September 2017 on and was completed in January 2018. Structural steel components were provided by Wilson Iron Works, a local fabrication shop.

Categories :
Steel Erection
×
GREATER CHICAGO CASTER UPGRADE

Burns Harbor, Indiana 
22 miles from Gary

Through our in-house pipe fabrication facility, STEVENS Engineers & Constructors fabricated and installed nearly 40,000 LF of stainless piping between two new continuous casters 40 miles outside of Chicago in Burns Harbor.

STEVENS completed a new caster for this project, from material procurement to machine start-up, in less than 3 months by utilizing in-house mandrel benders and Tip-Tig welders.

On an existing caster, we completed the work on an upgrade outage of Molds and Oscillators in 10 days.

Pipe used on this project varied from 20” all the way to ¾” with material ranging from carbon steel to 316 stainless and in-schedule from standard to XXS.

All work was performed to B31.1 code with 2,000+ heli-arc welds. For the duration of this project, STEVENS did not have a single rejected weld.

Categories :
Pipe Fabrication & Installation
  • ARCELORMITTAL
    ARCELORMITTAL
    Civil Concrete | Heavy Rigging | Pipe Installation | Equipment Setting & Precision Alignment
  • HAMMOND SPORTS COMPLEX
    HAMMOND SPORTS COMPLEX
    Steel Erection
×
ARCELORMITTAL

East Chicago, Indiana

9 miles from Gary, IN

Over the course of five months in 2016, STEVENS completed the #2 Slab Caster Upgrade at ArcelorMittal Indiana Harbor West Facility.

STEVENS scope of work included:

  1. Extensive modifications to existing foundations
  2. Heavy rigging
  3. Precision level and alignment of a new slab caster
  4. Refurbishing equipment from the tundish down to the cut off the machine — all with minimal engineering.
  5. Pipe installation for a new spray chamber, water, grease, air and hydraulic — all field routed and installed “as-built”.

Our work on this project was performed over multiple shifts, logging over 70,000 man hours without a single safety incident.

Categories :
Civil Concrete | Heavy Rigging | Pipe Installation | Equipment Setting & Precision Alignment
×
Gary Steel Erection Services | STEVENS Engineers & Constructors
Gary Steel Erection Services | STEVENS Engineers & Constructors
HAMMOND SPORTS COMPLEX
Hammond, Indiana 

11 miles from Gary

STEVENS erected structural steel, joists, and decking for this 135,000 square-foot state-of-the-art sports complex just outside of Chicago.

This complex features:

  • 6 basketball courts
  • 12 volleyball courts
  • 2 regulation-size indoor soccer fields
  • 6 batting cages

STEVENS also installed an upper-level track used for running and walking that doubles as stadium seating for sporting events in the facility.

Construction started in September 2017 on and was completed in January 2018. Structural steel components were provided by Wilson Iron Works, a local fabrication shop.

Categories :
Steel Erection
  • GREATER CHICAGO CASTER UPGRADE
    GREATER CHICAGO CASTER UPGRADE
    Pipe Fabrication & Installation
×
GREATER CHICAGO CASTER UPGRADE

Burns Harbor, Indiana 
22 miles from Gary

Through our in-house pipe fabrication facility, STEVENS Engineers & Constructors fabricated and installed nearly 40,000 LF of stainless piping between two new continuous casters 40 miles outside of Chicago in Burns Harbor.

STEVENS completed a new caster for this project, from material procurement to machine start-up, in less than 3 months by utilizing in-house mandrel benders and Tip-Tig welders.

On an existing caster, we completed the work on an upgrade outage of Molds and Oscillators in 10 days.

Pipe used on this project varied from 20” all the way to ¾” with material ranging from carbon steel to 316 stainless and in-schedule from standard to XXS.

All work was performed to B31.1 code with 2,000+ heli-arc welds. For the duration of this project, STEVENS did not have a single rejected weld.

Categories :
Pipe Fabrication & Installation
  • ARCELORMITTAL
    ARCELORMITTAL
    Civil Concrete | Heavy Rigging | Pipe Installation | Equipment Setting & Precision Alignment
×
ARCELORMITTAL

East Chicago, Indiana

9 miles from Gary, IN

Over the course of five months in 2016, STEVENS completed the #2 Slab Caster Upgrade at ArcelorMittal Indiana Harbor West Facility.

STEVENS scope of work included:

  1. Extensive modifications to existing foundations
  2. Heavy rigging
  3. Precision level and alignment of a new slab caster
  4. Refurbishing equipment from the tundish down to the cut off the machine — all with minimal engineering.
  5. Pipe installation for a new spray chamber, water, grease, air and hydraulic — all field routed and installed “as-built”.

Our work on this project was performed over multiple shifts, logging over 70,000 man hours without a single safety incident.

Categories :
Civil Concrete | Heavy Rigging | Pipe Installation | Equipment Setting & Precision Alignment
  • HAMMOND SPORTS COMPLEX
    HAMMOND SPORTS COMPLEX
    Steel Erection
×
Gary Steel Erection Services | STEVENS Engineers & Constructors
Gary Steel Erection Services | STEVENS Engineers & Constructors
HAMMOND SPORTS COMPLEX
Hammond, Indiana 

11 miles from Gary

STEVENS erected structural steel, joists, and decking for this 135,000 square-foot state-of-the-art sports complex just outside of Chicago.

This complex features:

  • 6 basketball courts
  • 12 volleyball courts
  • 2 regulation-size indoor soccer fields
  • 6 batting cages

STEVENS also installed an upper-level track used for running and walking that doubles as stadium seating for sporting events in the facility.

Construction started in September 2017 on and was completed in January 2018. Structural steel components were provided by Wilson Iron Works, a local fabrication shop.

Categories :
Steel Erection
  • GREATER CHICAGO CASTER UPGRADE
    GREATER CHICAGO CASTER UPGRADE
    Pipe Fabrication & Installation
×
GREATER CHICAGO CASTER UPGRADE

Burns Harbor, Indiana 
22 miles from Gary

Through our in-house pipe fabrication facility, STEVENS Engineers & Constructors fabricated and installed nearly 40,000 LF of stainless piping between two new continuous casters 40 miles outside of Chicago in Burns Harbor.

STEVENS completed a new caster for this project, from material procurement to machine start-up, in less than 3 months by utilizing in-house mandrel benders and Tip-Tig welders.

On an existing caster, we completed the work on an upgrade outage of Molds and Oscillators in 10 days.

Pipe used on this project varied from 20” all the way to ¾” with material ranging from carbon steel to 316 stainless and in-schedule from standard to XXS.

All work was performed to B31.1 code with 2,000+ heli-arc welds. For the duration of this project, STEVENS did not have a single rejected weld.

Categories :
Pipe Fabrication & Installation

decades of expertise

Wastewater overview |Gary

STEVENS is celebrating nearly 50 years of delivering high-quality construction services.

Our engineers and operators have broad-ranging expertise in a variety of industrial sectors.

From our work in bridge building and wastewater, to our current standing as your industrial contractor of choice, we leverage our diverse construction experience to benefit every new project.

custom-designed projects

Gary IN Chemical plant

Every component of a STEVENS construction project is tailored to our clients' precise specifications.

Our team of engineers and constructors works directly with our clients to ensure the smallest detail of a project is considered in the planning phase and implemented during construction.

It is our #1 priority to exceed our clients’ expectations with custom industrial projects designed to deliver year after year.

Gary's Best industrial contractor

Achieving success and gaining progress isn’t that easy, but if you do and are searching for a reliable partner who you can rely on in Gary, Indiana, Don’t think twice to contact STEVENS Engineers and Construction.

Building on Experience, Commitment, and Quality is at the core of the services that we provide. We always make sure that in each project entrusted on us, the clients can receive top quality of service.

Get your free quote now by clicking the button below and start your building projects with STEVENS today!

CONTACT STEVENS NOW

 

 

Stevens Engineers & Constructors

Address: 3001 Dickey Rd, East Chicago, IN 46312
Phone: (440) 234-7888