industrial contractor in Altoona - stevens engineers and constructors

Behind every success is the opportunity to get better. However, these improvements may also come with demands such as expansion. But, don’t hold back because of the possible complications in conducting a new edifice project, as STEVENS Engineers and Constructors will ensure you good quality and reliable service because your progress is our accomplishment.

We are here to offer assistance for any industry in Altoona, and to provide for all of their needs on a particular project. STEVENS is knowledgeable of the complications in hiring a dependable partner in Pennsylvania for a persistent and on-time construction project.

With over 75 years of providing quality service in the field of Industrial Contractors in Altoona, you can expect our commitment to our best work. 

Furthermore, STEVENS can provide you the assurance in meeting all of your expectations by working hand in hand for all of your wants and needs from an Industrial Contractor in Altoona, PA.

With fully integrated engineering and construction services and the latest software and machinery for industrial contractors, our expertise spans a variety of industrial sectors, including:
Industrial Construction Near Me | Construction Company Near Me

  1. Metals
  2. Oil & Gas
  3. Energy & Power
  4. Chemical
  5. Waste Water
  6. Government
  7. Food

As a national leader in heavy industrial construction, our highly skilled team of constructors and engineers have the experience required to handle large and small-scale industrial projects, while adhering to tight standards for permitting, safety, and quality.

We provide top-quality construction services to ensure end results perform above your expectations year after year.

STEVENS' Construction capabilities 

Click on an industrial construction service listed below to learn more. 

All our years of achievement is not just because of our reliable service but also because we have Nucor all the way through as our steel manufacturer. And, as partners, we ensure you that all we use in erecting our buildings are highly durable American-made steel.

One of our prime services is the Pre-engineered metal building kits, as it is pertinent for any kind of industry. These steel buildings STEVENS on Altoona are known for their compliance, unlimited customization options, and aesthetically-pleasing design. 

Furthermore, STEVENS also has BIM or Building Information Modeling. This tool helps us in showing the possible outlook of the project even before we start building, which gives us a great benefit as we can show it on our clients and apply all their idea and probable requirements.

Also, with Nucor, we can guarantee a durable and environmentally-friendly product as STEVENS uses 90% recycled steel from them. Pre-engineered buildings are an ideal solution for future expansions for companies in Altoona and can be easily customized for energy-efficiency because of its versatility.

With a wide range of civil service and quality works we make sure that each of our clients are always satisfied with their project for expansion or renovation in Altoona, PA. One great example of our competence is building PPL Brunner Island which we and Shaw, our subcontractor, managed to complete 36,500 cy of excavation, 10,500 cy of mass pours of foundations and 8,000 LF of H-pile outsourced.

So if you ever find yourself looking for the best partner that could assist you with the civil concrete services, STEVENS is always open for these opportunities. 

Our services in Altoona, PA include: 

  1. Rebar
  2. Curing
  3. Water stops 
  4. Foundations 
  5. Anchor bolts 
  6. Expansion 
  7. Additives 
  8. Construction joints 
  9. Mass pours
  10.  Layout 
  11. Embedded metal 
  12. Quality control

De-watering, utility relocation, backfill, and mass excavation are some of the services we offer within the spectrum of comprehensive excavation and site work.

With 50 years in the industry working on a large-scale construction projects with various clients from the industry, STEVENS has moved many cubic yards of land for property developments.

And, when it comes to scheduling, layout, reporting, safety, national regulations, and permitting we keep our standards and quality lifted and through the process of accomplishment we always ensure that we fill the clients’ exact specifications.

STEVENS goal is to provide the best steel structures with our commitment to hard work and to service a wide range of industrial purposes. STEVENS knows how imperative it is too always look after safety as our profession involves a lot of possible danger. Fortunately, we've enjoyed 50 years of business without any casualties. We will not tarnish the name that we have built in the industry by violating safety regulations and standards. Our metal erection expertise spans from raising gang on buildings to changing crane rails and beyond.

With STEVENS, you can also obtain an advanced design and engineering services for engineered lifts and complete these projects with CDMG, our wholly-owned engineering subsidiary.

And with STEVENS dedication to meet the industry’s demands for construction, our engineers and constructors never miss out on routine crane inspections, regular equipment checks, safety and quality control, and more.

STEVENS completes geotechnical testing as-needed for soil stability and other factors to identify the structural requirements for each project. We know the benefit of a durable H-Pile in securing facilities located in challenging soil conditions and active seismic areas. 

If it's a bridge, highway or any other Sheet and H-pile project, as long as you have STEVENS it is possible to be accomplished. With the best pile driving equipment, we install H-Pile for deep foundation applications where anyone can lay their hands on. Also, with our full-service construction and efficiency, most clients would take our excavation services simultaneous with our Sheet and H-pile capabilities.

Our rigging services in Altoona include, but are not limited to: 

  1. Verifying weights 
  2. Alignment 
  3. Rigging limitations 
  4. Installations 
  5. Clearance restrictions 

Here at STEVENS, we’re very strict with preventing hazards from rigging and heavy living projects affect our workers or our customers, as easing future complications is our engineer's and constructor's main focus before an erection project.


In every comprehensive heavy rigging service that we offer we assure that each is done with complete consideration for security in every project, all with insurance for on-schedule accomplishment according to our client's exact specifications.

Here at STEVENS, we feel that every successful industrial construction project begins with quality design and engineering. We guarantee that the outcome of every project matches our client's expectations seamlessly.

The project without communication is a partnership without understanding, and that’s why our engineers are determined to build strong communication with our take holders. We allow them to collaborate on project decisions to make sure that everything is agreed upon before the construction.

Our engineers are built and skilled with results-driven planning, thorough scheduling, team collaboration, and detailed regular reporting are some of the characteristics our skilled engineers have.

When it comes to pipe fabrication, STEVENS also steps up as we have our own fabricating shop which is capable of producing 10,000 LF of fabricated pipes monthly. 

Having these provides us with the ability to utilize state-of-the-art welding and cutting equipment and a variety of mandrel benders to produce the best of qualities for a pipe on the market with minimal rejected welds at a faster rate. STEVENS also can do specializing pipes for a more specific project with less cost.

We also offer hydrostatic testing, protective coating solutions, chemical cleaning and flushing, documentation, and other pipe-related services. 

STEVENS maximizes the latest pipe fabrication technology, tooling, cutting, welding, and mandrel benders to provide fabricated pipes that are pinned with the quality control and local and national standards. This reduces our communication errors, faulty products, and delayed delivery.

 

Whether it is ¾” to 20” of pipes, carbon steel to stainless and in-schedule XXS to standard, our professionals can handle those. With all of these capabilities we never hold back in also covering the process of installing them. 

Furthermore, we comply with our pipe installation services with sincerity of work, quality, effectivity, safety and of course a budget-friendly cost. But, before getting into the project, the installation proposal is the very first thing STEVENS does to ensure that nothing will be placed at different positions later on.

Obviously, efficiency is our trademark, that is why STEVENS only uses equipment such as precision laser alignment devices as a part of our arsenal of world-class equipment. By simplifying maintenance procedures and reducing energy consumption one machine at a time, STEVENS has what it takes to give the best assistance for better productivity.

For your plant machines to last for a bigger production, STEVENS professionals ensure a thorough setting and alignment services while working quickly to reduce downtime.

There are other machines our talented field engineers operate such as a robotic total station to have full optimization of a machine’s full potential. Our team works to the one-thousandth of an inch to mitigate damage to bearings and seals.

Altoona Construction Projects

With our various capabilities, STEVENS is not just a general contractor based in Altoona, Pennsylvania. We have an extensive portfolio of successful industrial construction projects throughout the Altoona area and beyond.

Also by having all the trending technologies for industrial construction, we can ensure that each work and project will be inclined with all the demands and expectations of our clients. We perform scheduling, layout, and reporting to ensure your project is completed on time and with the highest efficiency.

PENNSYLVANIA PROJECTS

  • ALLEGHENY ENERGY
    ALLEGHENY ENERGY
    Steel Erecting
  • ATI BRACKENRIDGE
    ATI BRACKENRIDGE
    Civil Concrete
  • PPL MONTOUR POWER PLANT
    PPL MONTOUR POWER PLANT
    Site Work & Excavation
×
Altoona Precision & Alignment | Altoona Construction Company
Altoona Precision & Alignment | Altoona Construction Company
Altoona Construction Contractor | STEVENS
Altoona Construction Contractor | STEVENS
ALLEGHENY ENERGY

Springdale, Pennsylvania

STEVENS Engineers & Constructors, as a subcontractor to Black & Veatch, erected five separate buildings for a combined cycle facility located in Springdale, Pennsylvania. The specific structures that were erected by STEVENS included the following:

Control Building
Generation Building
Combustion Turbine Building
Water Treatment Building
Pump Building

Also included in the scope of work for this project were extensive excavation and foundation installation.

With safety and efficiency in mind, STEVENS had our wholly owned subsidiary, CDMG, design an adjustable spreader beam to lift and set the bridge tress that was assembled on the ground. STEVENS takes pride in being able to utilize the various talents within our family of companies. Due to this ability, we were able to complete this part of the project in a timely and safe manner.

Categories :
Steel Erecting
×
Civil Concrete
Civil Concrete
ATI BRACKENRIDGE

Brackenridge, Pennsylvania

STEVENS Engineers and Constructors was heavily involved in ATI’s state of the art HRM located in Brackenridge, Pennsylvania.

While primarily based on two large civil foundation packages, STEVENS was also required to excavate an area roughly 300’ wide x 1,100’ long x 20’ deep. STEVENS demoed more than 17,000 cy of old foundation, as well as installed more than 1,100 pounds of sheet pile along with the installation of numerous deep man hole and 36” concrete storm pipe.

At the end of the project, STEVENS had formed and poured more than 89,000 cy of concrete — including embedded metals, anchor bolts and elevated slabs. All of this was done throughout all four seasons, and on an extremely congested site.

Categories :
Civil Concrete
×
Altoona Site Work | Stevens Engineers and Constructors
Altoona Site Work | Stevens Engineers and Constructors
PPL MONTOUR POWER PLANT

Washingtonville, Pennsylvania

STEVENS, subcontracted by Stone and Webster, utilized Robotic Total Stations and Carlson Earthwork Software in conjunction with on-site engineering and third-party soils testing to excavate 200,000 cy of earth, 70,000 cy of rock, excavated a stormwater retainage pond, placed storm drain piping, roads and rail beds and backfilled an area of five acres with 2A limestone to create a storage area for the storage of raw limestone used in the process of the FGD system at the PPL Montour Power Plant.

All local, state and federal permits regarding environmental protections were in place and observed, allowing for minimal environmental impacts. Sediment control and erosion best management practices were followed prior to and monitored during construction. Heavy equipment used to accomplish the project included CAT excavators, over-the-road dump trucks, backhoes, D8 dozers, rollers, graders and lull forklifts. Every precaution was taken to promote on-site safety including daily and weekly safety meetings, equipment inspections and daily excavation inspections prior to the beginning of work. The expertise of the on-site crew working in conjunction with Stone and Webster’s engineers allowed for continuous excavation and backfill without neglecting safety or quality of work. All excavated material was loaded onto road trucks with a CAT excavator and hauled to a local landfill. All rock excavation was done with hydraulic hoe rams and after the site was recontoured, the site not used in the storage and or process of limestone was seeded. STEVENS provided daily quantities and weekly drawings for client’s verification of progress.

Categories :
Site Work & Excavation
  • ALLEGHENY ENERGY
    ALLEGHENY ENERGY
    Steel Erecting
  • ATI BRACKENRIDGE
    ATI BRACKENRIDGE
    Civil Concrete
×
Altoona Precision & Alignment | Altoona Construction Company
Altoona Precision & Alignment | Altoona Construction Company
Altoona Construction Contractor | STEVENS
Altoona Construction Contractor | STEVENS
ALLEGHENY ENERGY

Springdale, Pennsylvania

STEVENS Engineers & Constructors, as a subcontractor to Black & Veatch, erected five separate buildings for a combined cycle facility located in Springdale, Pennsylvania. The specific structures that were erected by STEVENS included the following:

Control Building
Generation Building
Combustion Turbine Building
Water Treatment Building
Pump Building

Also included in the scope of work for this project were extensive excavation and foundation installation.

With safety and efficiency in mind, STEVENS had our wholly owned subsidiary, CDMG, design an adjustable spreader beam to lift and set the bridge tress that was assembled on the ground. STEVENS takes pride in being able to utilize the various talents within our family of companies. Due to this ability, we were able to complete this part of the project in a timely and safe manner.

Categories :
Steel Erecting
×
Civil Concrete
Civil Concrete
ATI BRACKENRIDGE

Brackenridge, Pennsylvania

STEVENS Engineers and Constructors was heavily involved in ATI’s state of the art HRM located in Brackenridge, Pennsylvania.

While primarily based on two large civil foundation packages, STEVENS was also required to excavate an area roughly 300’ wide x 1,100’ long x 20’ deep. STEVENS demoed more than 17,000 cy of old foundation, as well as installed more than 1,100 pounds of sheet pile along with the installation of numerous deep man hole and 36” concrete storm pipe.

At the end of the project, STEVENS had formed and poured more than 89,000 cy of concrete — including embedded metals, anchor bolts and elevated slabs. All of this was done throughout all four seasons, and on an extremely congested site.

Categories :
Civil Concrete
  • PPL MONTOUR POWER PLANT
    PPL MONTOUR POWER PLANT
    Site Work & Excavation
×
Altoona Site Work | Stevens Engineers and Constructors
Altoona Site Work | Stevens Engineers and Constructors
PPL MONTOUR POWER PLANT

Washingtonville, Pennsylvania

STEVENS, subcontracted by Stone and Webster, utilized Robotic Total Stations and Carlson Earthwork Software in conjunction with on-site engineering and third-party soils testing to excavate 200,000 cy of earth, 70,000 cy of rock, excavated a stormwater retainage pond, placed storm drain piping, roads and rail beds and backfilled an area of five acres with 2A limestone to create a storage area for the storage of raw limestone used in the process of the FGD system at the PPL Montour Power Plant.

All local, state and federal permits regarding environmental protections were in place and observed, allowing for minimal environmental impacts. Sediment control and erosion best management practices were followed prior to and monitored during construction. Heavy equipment used to accomplish the project included CAT excavators, over-the-road dump trucks, backhoes, D8 dozers, rollers, graders and lull forklifts. Every precaution was taken to promote on-site safety including daily and weekly safety meetings, equipment inspections and daily excavation inspections prior to the beginning of work. The expertise of the on-site crew working in conjunction with Stone and Webster’s engineers allowed for continuous excavation and backfill without neglecting safety or quality of work. All excavated material was loaded onto road trucks with a CAT excavator and hauled to a local landfill. All rock excavation was done with hydraulic hoe rams and after the site was recontoured, the site not used in the storage and or process of limestone was seeded. STEVENS provided daily quantities and weekly drawings for client’s verification of progress.

Categories :
Site Work & Excavation
  • ALLEGHENY ENERGY
    ALLEGHENY ENERGY
    Steel Erecting
×
Altoona Precision & Alignment | Altoona Construction Company
Altoona Precision & Alignment | Altoona Construction Company
Altoona Construction Contractor | STEVENS
Altoona Construction Contractor | STEVENS
ALLEGHENY ENERGY

Springdale, Pennsylvania

STEVENS Engineers & Constructors, as a subcontractor to Black & Veatch, erected five separate buildings for a combined cycle facility located in Springdale, Pennsylvania. The specific structures that were erected by STEVENS included the following:

Control Building
Generation Building
Combustion Turbine Building
Water Treatment Building
Pump Building

Also included in the scope of work for this project were extensive excavation and foundation installation.

With safety and efficiency in mind, STEVENS had our wholly owned subsidiary, CDMG, design an adjustable spreader beam to lift and set the bridge tress that was assembled on the ground. STEVENS takes pride in being able to utilize the various talents within our family of companies. Due to this ability, we were able to complete this part of the project in a timely and safe manner.

Categories :
Steel Erecting
  • ATI BRACKENRIDGE
    ATI BRACKENRIDGE
    Civil Concrete
×
Civil Concrete
Civil Concrete
ATI BRACKENRIDGE

Brackenridge, Pennsylvania

STEVENS Engineers and Constructors was heavily involved in ATI’s state of the art HRM located in Brackenridge, Pennsylvania.

While primarily based on two large civil foundation packages, STEVENS was also required to excavate an area roughly 300’ wide x 1,100’ long x 20’ deep. STEVENS demoed more than 17,000 cy of old foundation, as well as installed more than 1,100 pounds of sheet pile along with the installation of numerous deep man hole and 36” concrete storm pipe.

At the end of the project, STEVENS had formed and poured more than 89,000 cy of concrete — including embedded metals, anchor bolts and elevated slabs. All of this was done throughout all four seasons, and on an extremely congested site.

Categories :
Civil Concrete
  • PPL MONTOUR POWER PLANT
    PPL MONTOUR POWER PLANT
    Site Work & Excavation
×
Altoona Site Work | Stevens Engineers and Constructors
Altoona Site Work | Stevens Engineers and Constructors
PPL MONTOUR POWER PLANT

Washingtonville, Pennsylvania

STEVENS, subcontracted by Stone and Webster, utilized Robotic Total Stations and Carlson Earthwork Software in conjunction with on-site engineering and third-party soils testing to excavate 200,000 cy of earth, 70,000 cy of rock, excavated a stormwater retainage pond, placed storm drain piping, roads and rail beds and backfilled an area of five acres with 2A limestone to create a storage area for the storage of raw limestone used in the process of the FGD system at the PPL Montour Power Plant.

All local, state and federal permits regarding environmental protections were in place and observed, allowing for minimal environmental impacts. Sediment control and erosion best management practices were followed prior to and monitored during construction. Heavy equipment used to accomplish the project included CAT excavators, over-the-road dump trucks, backhoes, D8 dozers, rollers, graders and lull forklifts. Every precaution was taken to promote on-site safety including daily and weekly safety meetings, equipment inspections and daily excavation inspections prior to the beginning of work. The expertise of the on-site crew working in conjunction with Stone and Webster’s engineers allowed for continuous excavation and backfill without neglecting safety or quality of work. All excavated material was loaded onto road trucks with a CAT excavator and hauled to a local landfill. All rock excavation was done with hydraulic hoe rams and after the site was recontoured, the site not used in the storage and or process of limestone was seeded. STEVENS provided daily quantities and weekly drawings for client’s verification of progress.

Categories :
Site Work & Excavation

decades of expertise

industrial contractor Altoona | Altoona general contractors

STEVENS is celebrating nearly half a century of of high-quality construction services in the Great Lakes Region and beyond.

Our operators and engineers bring broad-ranging construction expertise to every project we take on.

From our work in bridge building and wastewater to our current standing as your industrial contractor of choice, we leverage our experience to improve your project.

custom-designs

commercial construction companies Altoona | construction engineering services

Down to the last bolt, every detail of a STEVENS project is tailored to your exact specifications.

Our team of engineers and constructors work directly with you to guarantee your goals become strategies and those strategies are implemented for construction.

Our Constructors and Engineers are dedicated to exceeding your expectations with industrial projects that are 100% tailored to your needs.

Altoona's Best industrial contractor

By Building on Experience, Commitment and Quality we know that each project we have will always be the best as STEVENS provides only quality and reliable service. 

We know what it takes to achieve and gain progress that is why we only offer nothing but the best for each project that is entrusted to us in Altoona, Pennsylvania. STEVENS Engineers and Construction is always open to changes, which is why we maintain the reputation of a reliable industrial contractor partner. 

Get a free quote now by clicking the button below and start building your projects with STEVENS today! 


Altoona Industrial Construction


Stevens Engineers & Constructors

Address: 150 Technology Dr, Canonsburg, PA 15317
Phone: (724) 873-1200

Employee Verification

(724) 514-2740

Our Offices

Cleveland - Northeast, OH Corporate Headquarters
Pittsburgh - Southwest, PA
Hobart - Northwest IN

Quick Links

Contact Us
© 2025 Stevens. All Rights Reserved. STEVENS is a registered service mark of Stevens Engineers & Constructors. | Legal | Privacy | Marketed By Donovan Digital Solutions