precoat2 Arlington Heights, Illinois | STEVENS
PRECOAT1 Arlington Heights, Illinois | STEVENS
precoat Arlington Heights, Illinois | STEVENS
Thinking of where you can find a reliable partner in building a new structure or extension for your company in Arlington Heights, IL? STEVENS Engineers and Constructors is the company you’re looking for. STEVENS provides a custom-designed pre-engineered building with full-service teams to help you every step of the way.
The demand in pre-engineered establishments arises in Illinois due to a minimal amount of customizable choices available.
Regardless if it’s for a Government Building, Chemical Manufacturing Plant, Energy, and Power Plant, or any other industrial building you have in mind, with our top-notch Metal Building Kits you can be assured you will be able to achieve all your goals and attain the right and suitable building you want.
Read on to learn more about pre-engineered metal buildings and how STEVENS can help you construct a facility of this kind in Arlington Heights, IL.
If your company finds the need for expansion for your metal service facility, or if you want to start a food and beverage manufacturing plant and need a facility, a Pre-engineered building could be the right choice for you.
There are many different reasons a Pre-engineered building is the best answer for your building needs, let STEVENS show you the benefits.
The trust you give to STEVENS won’t be wasted, as we only provide the best of our ability and knowledge in providing assistance to your business with its facility needs. This allows you to reap the benefits of prefabricated metal buildings which include the following:
Gaining the trust and identity of being a reliable partner isn’t that easy as it requires decades of hard work and experience and that is what STEVENS has been holding up to now. We assure you that in each project entrusted on us we only give our best and foremost service.
STEVENS is very much aware of complications in launching a new project, especially when it's about building facilities. However, we never stop there, we make impossible things possible with the right knowledge and exploration. With these practices, we’re able to provide the best service and quality work for our clients.
Our confidence in meeting all your demands and standards comes from your faith in choosing us to assist you for your steel building project in Arlington Heights. We strive to provide the best materials as well as having teams that assist in planning your desired design, preparing the site, construction of the building, and physically erect your metal building at the site.
STEVENS has the experience, workforce, resources, and expertise to:
With the utilization of BIM, a 3D building modeling software, and Nucor steel, our engineering, and construction company can meet your needs for your Pre-Engineered Metal Building Project.
Attaining the ability to provide high-quality service is not that simple, this reason makes STEVENS and Nucor partners. Being one of the most reliable providers of first-class All-American steel composed of 80% recycled steel (and is 100% recyclable), Nucor has what it takes to be the best partner.
We closely follow Nucor’s F.O.C.U.S principles - Fits, On-time delivery, Competitive pricing, Unbeatable services, and Solutions that work – and apply these to projects of any size and magnitude.
STEVENS has been celebrating accomplishments and achievements with Nucor for over two decades. Our partnership is bound with the proficiency of work, as Nucor is capable of pre-fabricating 4,000 projects per year and together we make sure to only offer sustainable and durable building projects.
Nucor has been a part of STEVENS in every Custom-Designed Pre-Engineered Metal Buildings Using BIM for more than two decades.
Our advanced 3D building modeling software (BIM) is an amazing tool we use at STEVENS to design your pre-engineered metal buildings.
By using this advanced imaging tool it helps our architects, designers, engineers, and project managers to visualize in designing, planning, and executing a building project.
With BIM our professionals are capable of providing fully functional buildings and excellent quality. Possible complications can be detected with this software technology so they can be fixed and avoided once the erection begins (this helps to avoid costly setbacks later on in the project).
Furthermore, with BIM capabilities, STEVENS is able to finish any project in a given amount of time, with flawless quality and affordable prices. At STEVENS you can also have a full-service team to develop, design, and erect a metal building structure that follows every specification and requirement you (and your business) have.
Providing great service and building a solid relationship with the client is what STEVENS' main objective is. STEVENS wants to build relationships as strong as the buildings they build. This type of relationship helps with understanding the client and their needs so that we are able to create the perfect pre-engineered building for their business.
With the development and construction of pre-engineered metal buildings, we are capable of meeting all local codes and requirements for industry-specific buildings. And, at STEVENS you can also have professional full-service from (design, engineering, project management, installation, erection, and completion) for any steel building projects you may have in the future.
Click on the button below to Get a Free Quote for your next pre-engineered building in Arlington Heights, IL today!
Location: Weirton, West Virginia
As is often the case, there is much more to a “pre-engineered” building than the building itself.
In the case of Precoat Metals, the scope included providing the geotechnical reports, foundations, storm water, electrical, HVAC, and fire protection as well as obtaining all permits. The storm water piping consisted of 1000 lineal feet, crossing under two roads, to a retention pond.
The civil concrete included spread footers and grade walls and 23,000 square feet of floor slab poured to an FF 50/FL 50 finish specifications. This finish was critical to the owner’s plan to use remote controlled fork lifts for coil storage.
The building itself was 140’x120’ with an offset 70’x70’ attached by 2 tunnels 20’x20’ connecting the finishing line with the shipping building. The main building was 35’ high at the eave and 40 feet high to the ridge. The building also included 5’-0” skylights. The side walls consisted of 20,000 square feet of siding panels with 6” insulation. The building was covered by 23,500 square feet of standing seam roof, also with 6” insulation.
All work was performed to the owner’s satisfaction in terms of quality and schedule and cooperation within their operating facility. Most importantly, ZERO recordable accidents.
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: York Haven, Pennsylvania
This client required an entire “brown field” waste water treatment facility to support their coal fired generation plant. Our scope included:
Waste Water Treatment Plant, Civil, Building and Site Work 2006
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: Weirton, West Virginia
As is often the case, there is much more to a “pre-engineered” building than the building itself.
In the case of Precoat Metals, the scope included providing the geotechnical reports, foundations, storm water, electrical, HVAC, and fire protection as well as obtaining all permits. The storm water piping consisted of 1000 lineal feet, crossing under two roads, to a retention pond.
The civil concrete included spread footers and grade walls and 23,000 square feet of floor slab poured to an FF 50/FL 50 finish specifications. This finish was critical to the owner’s plan to use remote controlled fork lifts for coil storage.
The building itself was 140’x120’ with an offset 70’x70’ attached by 2 tunnels 20’x20’ connecting the finishing line with the shipping building. The main building was 35’ high at the eave and 40 feet high to the ridge. The building also included 5’-0” skylights. The side walls consisted of 20,000 square feet of siding panels with 6” insulation. The building was covered by 23,500 square feet of standing seam roof, also with 6” insulation.
All work was performed to the owner’s satisfaction in terms of quality and schedule and cooperation within their operating facility. Most importantly, ZERO recordable accidents.
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: York Haven, Pennsylvania
This client required an entire “brown field” waste water treatment facility to support their coal fired generation plant. Our scope included:
Waste Water Treatment Plant, Civil, Building and Site Work 2006
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: Weirton, West Virginia
As is often the case, there is much more to a “pre-engineered” building than the building itself.
In the case of Precoat Metals, the scope included providing the geotechnical reports, foundations, storm water, electrical, HVAC, and fire protection as well as obtaining all permits. The storm water piping consisted of 1000 lineal feet, crossing under two roads, to a retention pond.
The civil concrete included spread footers and grade walls and 23,000 square feet of floor slab poured to an FF 50/FL 50 finish specifications. This finish was critical to the owner’s plan to use remote controlled fork lifts for coil storage.
The building itself was 140’x120’ with an offset 70’x70’ attached by 2 tunnels 20’x20’ connecting the finishing line with the shipping building. The main building was 35’ high at the eave and 40 feet high to the ridge. The building also included 5’-0” skylights. The side walls consisted of 20,000 square feet of siding panels with 6” insulation. The building was covered by 23,500 square feet of standing seam roof, also with 6” insulation.
All work was performed to the owner’s satisfaction in terms of quality and schedule and cooperation within their operating facility. Most importantly, ZERO recordable accidents.
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: York Haven, Pennsylvania
This client required an entire “brown field” waste water treatment facility to support their coal fired generation plant. Our scope included:
Waste Water Treatment Plant, Civil, Building and Site Work 2006
| Categories : |
Pre-Engineered Buildings
|
|---|