If you are searching for options to expand your business facility, STEVENS is the partner for you! STEVENS Engineers and Constructors provides the highest quality of pre-engineered advanced Metal Building Kits to streamline your steel building project.
An increasing number of commercial and industrial facilities in the state of Kentucky choose pre-engineered buildings because of the plethora of customizable options available. With these customization options, you can build a structure that is not only operationally efficient but aesthetically pleasing as well.
Whether it’s for a Chemical Manufacturing Plant, Waste Water Facility, Energy and Power Plant, or any other industrial building your business requires, our top-notch Metal Building Kits can be designed and constructed to cater to your unique business requirements.
Read on to learn more about pre-engineered metal buildings and how STEVENS can help you construct a facility of this kind in Louisville, KY.
Whether your metal service facility is involved in fabricating extra-long steel structures, or you’re operating a food and beverage manufacturing plant and need to expand your production capabilities, a prefabricated building can offer compelling advantages for your company.
As your partner for your building project in Louisville, STEVENS can help your business with its facility needs, allowing you to reap the benefits of prefabricated metal buildings which include the following:
STEVENS has been providing excellent construction and building services for over 70 years. We use this experience and knowledge to provide our customers with the best products and services possible.
Our team at STEVENS understands the difficulty for businesses to secure financing for a new facility. It is essential to thoroughly research the company that you want to hire to make sure that your initial investment will meet your demands and deliver favorable returns.
STEVENS works hard to gain the trust of its clients. We provide the finest materials, as well as help in creating your desired design, site preparation, construction, and physically erect your metal building.
STEVENS has the experience, workforce, resources, and expertise to:
With the utilization of BIM, a 3D building modeling software, and Nucor steel, our Engineering and Construction company can meet your needs for your Pre-Engineered Metal Building Project.
STEVENS Engineers and Constructors has partnered with Nucor Building Systems to manufacture prefabricated buildings of highest quality standards. Nucor provides STEVENS with high-grade All-American steel that is made of 80% recycled steel (and is 100% recyclable).
We closely follow Nucor’s F.O.C.U.S principles - Fits, On-time delivery, Competitive pricing, Unbeatable services, and Solutions that work – and apply these to projects of any size and magnitude.
With 25 years of industry experience and leadership, Nucor helps STEVENS provide the most sustainable and durable buildings, which ultimately helps our clients adhere to an environmentally-minded business model. The more than 4,000 pre-fabricated steel structures that Nucor completes yearly is a vivid assessment of their capabilities.
Another benefit STEVENS offers is Building Information Modeling (BIM). BIM is an advanced 3D building modeling software that enables us to design your pre-engineered metal buildings.
This sophisticated imaging tool gives our architects, designers, engineers, and project managers a precise visual guide when designing, planning, and executing a building project.
With BIM, our team can be confident that your prefabricated building is structurally sound and spacious enough for its intended function. This software technology identifies any potential hazards in the design structure so that problems can be prevented and solved before erection begins (this helps to avoid costly setbacks later on in the project).
STEVENS' utilization of BIM allows our team to complete your project by the promised timeframe, within your chosen budget, and without any issues during erection. STEVENS can provide you with a full-service team to develop, design, and erect a metal building structure that follows every specification and requirement you (and your industry) have.
Our team takes pride in creating a productive relationship with our clients, ensuring that we understand their specific needs and requirements for their pre-engineered metal building project.
STEVENS develops and erects pre-engineered metal buildings that fit clients' needs and designs, while also meeting all local codes and requirements for industry-specific buildings. With our company, you will have a full-service construction team (design, engineering, project management, installation, erection, and completion) for your next steel building project.
Regardless of the size and nature of your industrial facility, STEVENS can provide your company with the most advanced metal building kits for your next steel building project in Louisville, KY.
Click on the button below to Get a Free Quote for your next pre-engineered building in Louisville, Kentucky, today!
Location: Weirton, West Virginia
As is often the case, there is much more to a “pre-engineered” building than the building itself.
In the case of Precoat Metals, the scope included providing the geotechnical reports, foundations, storm water, electrical, HVAC, and fire protection as well as obtaining all permits. The storm water piping consisted of 1000 lineal feet, crossing under two roads, to a retention pond.
The civil concrete included spread footers and grade walls and 23,000 square feet of floor slab poured to an FF 50/FL 50 finish specifications. This finish was critical to the owner’s plan to use remote controlled fork lifts for coil storage.
The building itself was 140’x120’ with an offset 70’x70’ attached by 2 tunnels 20’x20’ connecting the finishing line with the shipping building. The main building was 35’ high at the eave and 40 feet high to the ridge. The building also included 5’-0” skylights. The side walls consisted of 20,000 square feet of siding panels with 6” insulation. The building was covered by 23,500 square feet of standing seam roof, also with 6” insulation.
All work was performed to the owner’s satisfaction in terms of quality and schedule and cooperation within their operating facility. Most importantly, ZERO recordable accidents.
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: York Haven, Pennsylvania
This client required an entire “brown field” waste water treatment facility to support their coal fired generation plant. Our scope included:
Waste Water Treatment Plant, Civil, Building and Site Work 2006
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: Weirton, West Virginia
As is often the case, there is much more to a “pre-engineered” building than the building itself.
In the case of Precoat Metals, the scope included providing the geotechnical reports, foundations, storm water, electrical, HVAC, and fire protection as well as obtaining all permits. The storm water piping consisted of 1000 lineal feet, crossing under two roads, to a retention pond.
The civil concrete included spread footers and grade walls and 23,000 square feet of floor slab poured to an FF 50/FL 50 finish specifications. This finish was critical to the owner’s plan to use remote controlled fork lifts for coil storage.
The building itself was 140’x120’ with an offset 70’x70’ attached by 2 tunnels 20’x20’ connecting the finishing line with the shipping building. The main building was 35’ high at the eave and 40 feet high to the ridge. The building also included 5’-0” skylights. The side walls consisted of 20,000 square feet of siding panels with 6” insulation. The building was covered by 23,500 square feet of standing seam roof, also with 6” insulation.
All work was performed to the owner’s satisfaction in terms of quality and schedule and cooperation within their operating facility. Most importantly, ZERO recordable accidents.
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: York Haven, Pennsylvania
This client required an entire “brown field” waste water treatment facility to support their coal fired generation plant. Our scope included:
Waste Water Treatment Plant, Civil, Building and Site Work 2006
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: Weirton, West Virginia
As is often the case, there is much more to a “pre-engineered” building than the building itself.
In the case of Precoat Metals, the scope included providing the geotechnical reports, foundations, storm water, electrical, HVAC, and fire protection as well as obtaining all permits. The storm water piping consisted of 1000 lineal feet, crossing under two roads, to a retention pond.
The civil concrete included spread footers and grade walls and 23,000 square feet of floor slab poured to an FF 50/FL 50 finish specifications. This finish was critical to the owner’s plan to use remote controlled fork lifts for coil storage.
The building itself was 140’x120’ with an offset 70’x70’ attached by 2 tunnels 20’x20’ connecting the finishing line with the shipping building. The main building was 35’ high at the eave and 40 feet high to the ridge. The building also included 5’-0” skylights. The side walls consisted of 20,000 square feet of siding panels with 6” insulation. The building was covered by 23,500 square feet of standing seam roof, also with 6” insulation.
All work was performed to the owner’s satisfaction in terms of quality and schedule and cooperation within their operating facility. Most importantly, ZERO recordable accidents.
| Categories : |
Pre-Engineered Buildings
|
|---|
Location: York Haven, Pennsylvania
This client required an entire “brown field” waste water treatment facility to support their coal fired generation plant. Our scope included:
Waste Water Treatment Plant, Civil, Building and Site Work 2006
| Categories : |
Pre-Engineered Buildings
|
|---|